Forming technology
Documents on forming processes such as sheet metal forming, deep drawing, hydroforming and bulk forming.
Documents on this topic (62)
Documents are assigned based on their titles. A document can belong to more than one topic.
- D 707 - Joining by forming - Riveting and clinching - Innovative joining processes for practical application€25.50
- P 96 - Investigations into the joining of high-strength deep-drawn sheets€30.00
- P 222 - Simulation of the forming of surface-finished thin sheet composites€30.00
- P 242 - Investigation of the manufacturing possibilities of a steel fuel tank using hydromechanical and hydrostatic forming processes
- P 258 - Investigations into the applicability of hydrostatic forming processes for the production of stiffened, flat, lightweight moulded components and stamped parts made of sheet steel€30.00
- P 260 - Investigation of the production and forming possibilities of double-layered metal sheets joined at individual points by a suitable joining process (twin sheets)€30.00
- P 274 - Development of processes and tool systems for hydroforming of high-strength steel sheets€40.00
- P 278 - Behaviour of surface coatings on steel sheets during forming€30.00
- P 279 - Extending the limits of forming technology by applying the multi-point drawing technique€20.00
- P 305 - Possibilities and limits of forming steel materials with hydraulic active media€20.00
- P 328 - Characterisation of the material properties of steel after hydrostatic stretch forming€30.00
- P 352 - Development of a pneumomechanical deep drawing process for the forming of high-strength steel sheets€20.00
- P 355 - Development of a test method to determine the suitability of materials for hydroforming€30.00
- P 383 - Extension of forming limits by vibration-superimposed deep-drawing process€20.00
- P 410 - Production of a fuel tank of complex geometry from steel using hydroforming€20.00
- P 446 - Process-integrated punching and cutting in high-pressure forming processes€30.00
- P 452 - Process fundamentals for the semi-hot forming of corrugated parts with widely projecting mould elements€30.00
- P 457 - Investigations into the production of lightweight steel tubes by means of moulding with active media€20.00
- P 464 - Optimised production of component families with a geometrically flexible deep-drawing tool€20.00
- P 468 - Forming and further processing of flexibly rolled steel sheets (tailor-rolled blanks) for lightweight structures€30.00
- P 520 - Status report on research and application of active media-based sheet metal forming€40.00
- P 530 - Extension of a semi-finished product test method for hydroforming€20.00
- P 561 - Forming-based joining for stainless steel façade elements€20.00
- P 566 - Use of near-net-shape semi-finished steel products with variable diameters for hydroforming in the spinning - bending - hydroforming process chain€30.00
- P 567 - Simulation-based optimisation of the forming - laser beam welding process chain€20.00
- P 571 - Process limits and material behaviour in incremental CNC sheet metal forming€30.00
- P 639 - Development of a wear prediction system for the deep drawing of steels€20.00
- P 644 - Design of a process window for sheet metal forming of ultra-high-strength heat-treatable steels at elevated temperatures€30.00
- P 658 - Production of lightweight, multi-cell sheet metal structures for commercial vehicle construction using innovative forming processes based on active media€20.00
- P 738 - SIBUform - Increasing productivity and the range of applications for incremental sheet metal forming by combining it with stretch forming€30.00
- P 744 - Validation and extension of calculation methods for sheet metal forming, fatigue strength and crash design in vehicle construction with steel€50.00
- P 761 - Analysis and description of the forming behaviour and residual forming capacity of high-strength, multiphase steel materials€20.00
- P 772 - Investigation and extension of existing approaches for the improved description of friction and heat transfer in the FEM simulation of hot massive forming processes€30.00
- P 830 - Numerical description of damage during shear cutting and residual forming capacity for dual-phase steels using multiscale simulation€40.00
- P 846 - Investigations into the manufacturability of free-form envelope and façade elements as self-supporting structures without substructure made of stainless steel by means of incremental sheet metal forming (IBU)€40.00
- P 853 - Development of a user-oriented failure model for sheet metal forming simulation of ultra-high-strength steel materials€30.00
- P 855 - Increasing process reliability in the cold forming of case-hardening and heat-treatable steels by means of acoustic emission testing€30.00
- P 890 - Forming properties of laser-welded tailor-welded blanks made of high-strength multiphase steels - Characterisation, modelling and verification€30.00
- P 930 - Extension of the deformation limits of high-strength steel materials in bending forming processes through innovative process control and tools€30.00
- P 931 - Numerical optimisation of the deep drawing process when using drawing beads by developing a well-founded extended replacement model€30.00
- P 947 - Development of a gas-based cupping test to determine flow curves for hot sheet metal forming€30.00
- P 975 - Improvement of the wear properties of hot forming tools by laser cladding of carbide€18.00
- P 1004 - Hybrid forging Combined forming and joining€20.00
- P 1039 - Extended continuum mechanical damage model considering low triaxialities for deep drawing simulation of high performance steels€30.00
- P 1055 - Development of ultra-high-strength steels for alternative heat treatments and for cold forging of automotive powertrain components€40.00
- P 1057 - Lightweight construction through targeted adjustment of local component properties with optimised forming and machining processes€40.00
- P 1058 - Extension of technological limits in massive forming in different temperature ranges€20.00
- P 1063 - Tribosystem optimisation in the forming of complex components made of iron-manganese steels with TWIP effect€30.00
- P 1064 - Economical production of weight- and property-optimised functional components by means of incremental sheet metal forming€30.00
- P 1072 - Improvement of the formability of shear-cut cut surfaces of iron-manganese sheets by optimised cutting parameters€40.00
- P 1110 - Localised laser heat treatment of work-hardened steels to improve forming and functional properties for lightweight construction in the automotive industry€30.00
- P 1131 - Alloying concepts and process strategies for press-hardening steels with increased residual formability€30.00
- P 1146 - Forming and joining of sheet metal and solid elements in progressive dies to produce a hybrid steel control arm€30.00
- P 1217 - Inductive flange draw sensors for deep drawing€30.00
- P 1247 - Development of incremental microforming for the production of functional samples of metallic bipolar plates€30.00
- P 1345 - Production of three-dimensionally moulded façades with integrated solar thermal function using an innovative forming process€30.00
- P 1365 - Modelling the wear behaviour of coated forming tools for cold forging by means of experimental and numerical methods using the example of flat rolling€30.00
- P 1445 - Prediction of residual formability on preformed shear-cut component edges in open and closed section€30.00
- SEP 1237: Testing and Documentation Guideline for the Experimental Determination of Fracture Properties for Crash and Forming Simulation, 1st Edition€70.09
- SEP 1245: Approval process for steel sheet for automotive applications (cold forming)€68.04
- SEP 1933: Test method for the determination of particle detachment during the forming of sheet metal with a zinc-iron alloy (ZF) coating€37.10
- SEW 082: Definitions of normalising forming and thermomechanical forming€19.07
Other topics
- Testing methodsTest sheets, operating sheets and research reports on testing methods, including for steels, welded joints, coatings and lubricants.47 documents →
Ultrasonic testingSteel-Iron test sheets on ultrasonic testing of steel tubes, rolled semi-finished products and forgings.5 documents →
Joining & weldingDocuments on welding, adhesive bonding, brazing/soldering and mechanical joining of steel and mixed-material joints.257 documents →
