Fatigue & operational strength
Research reports on the fatigue and operational strength of steel components and joints.
Documents on this topic (40)
Documents are assigned based on their titles. A document can belong to more than one topic.
- P 16 - Time and fatigue strength of single-welded truss nodes made of round hollow sections€60.00
- P 76 - Fatigue tests of lightweight steel carriageways with trapezoidal hollow stiffeners in railway bridge construction€20.00
- P 93 - Residual stresses of welded hollow section joints and their influence on the fatigue and endurance strength€60.00
- P 101 - Investigations into the fatigue and fatigue strength of the dowelling of composite beams using shear stud dowels€70.00
- P 185 - Fatigue strength of high-strength fine-grained structural steels in the flame-cut condition€40.00
- P 227 - Influence of corrosion on the fatigue strength of joined components made of surface-finished sheet metal (vehicle construction)€30.00
- P 262 - Experimental determination and computational verification of the fatigue strength of practically manufactured laser beam welded joints of different geometries€20.00
- P 293 - Design rules for the assessment of the fatigue behaviour of crane structures - Classification of crane-specific notch details€50.00
- P 337 - Comparison of the fatigue strength of hard-turned and ground components€30.00
- P 512 - Assessment of the fatigue behaviour of crane structures when using high-strength and ultra-high-strength steels€50.00
- P 556 - Increasing the fatigue strength of hard-turned components€25.50
- P 620 - Efficient steel construction from high-strength steels under fatigue loading€40.00
- P 633 - Detailed solutions for fatigue issues and the use of high-strength steels in offshore wind turbines€30.00
- P 642 - Improvement of the notch geometry to increase the fatigue strength of high-strength and stainless steels through process control and innovative post-treatment in laser and arc welding and brazing€30.00
- P 744 - Validation and extension of calculation methods for sheet metal forming, fatigue strength and crash design in vehicle construction with steel€50.00
- P 778 - Design of fatigue-stressed components made of high-strength and ultra-high-strength fine-grained structural steels in crane and plant construction€90.00
- P 796 - Vibration resistance design of bonded steel components of vehicle construction under load with variable amplitudes€50.00
- P 802 - Investigations on the fatigue strength of resistance spot welded joints made of high-strength multiphase steels under consideration of production-specific influences€30.00
- P 815 - Fatigue-resistant trusses made of round hollow sections with thick-walled chords€60.00
- P 895 - Test-based fatigue strength of wheel load application€30.00
- P 925 - Experimental and computational evaluation of the fatigue strength of bolts with large dimensions in steel construction under consideration of surface layer influences€30.00
- P 938 - Influence of high-frequency hammering on the fatigue strength of ultra-high-strength steels of strength classes S960, S1100 and S1300 using the example of welded notch details€40.00
- P 1028 - Analysing the fatigue strength of bonded steel joints under multi-channel loading - MAyFAIr€30.00
- P 1033 - Fatigue analysis of rails based on fracture mechanics criteria€30.00
- P 1042 - Fatigue strength of hot-dip galvanised composite dowel bars in composite bridge construction€30.00
- P 1043 - Optimised dimensioning of high lattice towers for wind turbines under realistic consideration of aerodynamic effects, fatigue behaviour and the influence of steel grades€30.00
- P 1060 - Improving the fatigue strength of high-strength welded joints with the aid of novel LTT filler materials€30.00
- P 1091 - Development of a concept for the determination of preload losses in prestressed bolted joints under fatigue loading€70.00
- P 1132 - Extension of the fatigue design of K-nodes with gap made of RHP and KHP to high-strength steels and thick-walled sections€50.00
- P 1163 - Economic design of fatigue-stressed, welded round hollow section nodes taking into account the required weld seam quality€30.00
- P 1178 - Quantification of the influence of production automation and internal welding on the fatigue strength of hollow section nodes for offshore wind turbines€30.00
- P 1189 - Increasing the corrosion fatigue strength of steel wheelset shafts by inductive surface hardening€30.00
- P 1205 - Characterisation of the load-bearing behaviour of resistance spot welded joints of ultra-high-strength steels under cyclic loading and development of a calculation concept for fatigue strength€30.00
- P 1209 - Wheel load induced fatigue of crane runway girders for heavy duty metallurgical cranes€30.00
- P 1271 - Application of the structural stress concept for steel structures subjected to fatigue loading€30.00
- P 1296 - Adhesive strengthening of fatigue damage for steel structures€30.00
- P 1362 - Welding under operational stress in compliance with standardised requirements for seam quality and fatigue strength€30.00
- P 1389 - Increased fatigue strength of welded joints in wind energy by deep rolling€30.00
- P 1413 - Shape optimisation of welded-on lamellae under fatigue loading€30.00
- P 1560 - Influence of corrosive media on the fatigue strength of offshore wind turbines€30.00
Other topics
Testing methodsTest sheets, operating sheets and research reports on testing methods, including for steels, welded joints, coatings and lubricants.47 documents →
Ultrasonic testingSteel-Iron test sheets on ultrasonic testing of steel tubes, rolled semi-finished products and forgings.5 documents →
Joining & weldingDocuments on welding, adhesive bonding, brazing/soldering and mechanical joining of steel and mixed-material joints.257 documents →
